The New LeftField 3 System

leftfield compatibility

We are excited to announce that the LeftField System has been upgraded, offering faster speeds and even more reliable performance.

To keep LeftField at the forefront for filmmakers, we have had to make some important modifications with version 3. As its popularity continues to rise (with more cameras and accessories being supported), our commitment remains firm: providing the best quality and seamless filmmaking experience designed specifically with you in mind.

What is the difference between LeftField 2 & LeftField 3?

B4003 1034 LeftField 3 15mm LWS Baseplate Core Slide web
LeftField 3 15mm LWS Baseplate

The LeftField 3 15mm LWS Baseplate core is now 2mm shorter in height. This makes it compatible with ARRI BP-8 & BP-9 studio bridgeplates and LeftField 3 Studio bridgeplates when combined with the LeftField 3 Studio Dovetail Adapter (B4003.1031).

When transitioning from sliding to release mode, the lever cannot be opened without first pressing the safety button on the lever.

Identifying LeftField 3 & LeftField 2

All LeftField 3 products are clearly engraved with ‘LeftField 3’. Any product released prior to this upgrade can be considered as a part of the LeftField 2 line. LeftField 2 product that remain in production will be updated to have ‘LeftField 2’ engraved into the product.

Compatibility between LeftField 2 & 3

B4003 1033 LeftField 3 19mm Studio Bridgeplate 01 web
The new LeftField 3 19mm Studio QR Bridgeplate

Unfortunately, the upgrades to LeftField 3 make it incompatible with products from its predecessor, LeftField 2. You can only use compatible items within the same version of LeftField – that is, all items must be from either version 2 or version 3.

15mm & 19mm Studio Bridgeplates (ARRI BP-8/BP-9) – LeftField 3 is fully compatible with ARRI BP-8, BP-9 & LeftField 3 Studio Bridgeplates using the Studio Dovetail Adapter (B4003.1031). It is not compatible with older LeftField Studio Bridgeplates.

KASBAH – The rear of the LeftField 3 15mm LWS baseplate has a pin that prevents attaching to the incorrect shoulder pad. LeftField 3 versions of the KASBAH Shoulder Pad & Riser have been introduced. There is no change to the hand grip system

ARRI Standard Balance Plates – New LeftField 3 ARRI Standard Balance Plates have been introduced in 12/18/24″ lengths.

Camera Risers – All existing and future risers are compatible with LeftField 2 & 3.

Rigging options for the Sony FX6 with Alister Chapman

alister fx6

Sony Pro Ambassador Alister Chapman has shared a comprehensive overview of the LeftField System for the Sony FX6 on the XD-Cam blog.

Rigging the Sony FX6

Check out Alister’s blog to see the written article. Plus, he offers tons of free goodies including an amazing free LUT pack for the Sony FX6 and other Sony cameras.

Installation guide for RED KOMODO Metabones RF-PL Adapter Support

komodo lens adapter support 04

The RF mount on the Komodo is a sprung mount system, and relies on small springs inside the mount to pull the adapter into the right place.

If the adapter support is installed incorrectly, it can result in the lens adapter being pushed or tilted in the wrong direction, which can result in focus and other optical issues.

B4002 1021 RED Komodo Metabones RF PL Support 04 web
B4002.1021 RED KOMODO Metabones RF-PL Support

The following installation sequence must be followed in order to ensure that the adapter is supported correctly on the camera body.

B4002.1021 RED KOMODO Metabones RF-PL Support is not compatible with Metabones Canon EF Lens to RF-mount T Speed Booster® ULTRA 0.71x (EOS R).

B4002 1021 RED Komodo Metabones RF PL Support label
Metabones RF-PL Support

Required Tools

You will need to use a 2.5mm Hex Key.

A – Mount Screw – M3x10mm – 2.5mm Hex
B – Clamp Screw – M3x10mm – 2.5mm Hex

mb pl efr bt1 fs
Remove the tripod foot with the 2.5mm Hex key

Installation Steps

Step 1

Prepare the RED Komodo with the required plates. Ensure all the plates are secured and tight.

Step 2

Remove the Metabones tripod foot by loosening the two screws with the 2.5mm Hex Key.

Step 3

Using a 2.5mm Hex key, mount the support to the camera using the four screws (A) but do not tighten fully at this point.

Step 4

Install the lens adapter into the camera, allowing it to twist onto the camera body and click into place.

Step 5

Using the 2.5mm Hex key, gently tighten the clamping screw (B) on the support so that it starts to hold onto the adapter.

Step 6

Tighten up the mounting screws (A) on the side & top plate in a criss-cross pattern.

Step 7

Fully tighten the clamp screw (B) on the adapter support.

Step 8

To remove the support. First, loosen the clamp screw (B) before loosening the mounting screws (A) on the side & top plate.

Installation guide for RED KOMODO Canon 0.71x Expander Support

komodo lens adapter support 02

The RF mount on the Komodo is a sprung mount system, and relies on small springs inside the mount to pull the adapter into the right place.

If the adapter support is installed incorrectly, it can result in the lens adapter being pushed or tilted in the wrong direction, which can result in focus and other optical issues.

B4002 1026 RED Komodo Canon Support 02 web
B4002.1026 RED Komodo Canon RF 0.71x Expander Support

The following installation sequence must be followed in order to ensure that the adapter is supported correctly on the camera body.

B4002 1026 RED Komodo Canon 0 71x Expander Support label
Canon 0.71x Expander Support

Required Tools

You will need to use a 2.5mm Hex Key.

A – Mount Screw – M3x10mm – 2.5mm Hex
B – Support Screw – M3x6mm – 2.5mm Hex

Installation Steps

Step 1

Prepare the RED Komodo with the required plates. Ensure all the plates are secured and tight.

Step 2

Install the Canon adapter into the camera, allowing it to twist onto the camera body and click into place.

Step 3

Present the support to the Canon adapter. Using the 2.5mm hex key, mount the shorter support crews (B) into the mounting holes on the adapter but do not tighten fully

Step 4

Insert the longer mount screws (A) and secure the adapter to the side & top plates.

Step 5

Tighten up the mounting screws (A) finger tight, and then tighten all screws fully using a criss-cross pattern, including the support screws.

Step 6

To remove the support. First, loosen the mounting screws (A) before loosening the two captive screws (B) on the bottom of the adapter.

Installation guide for RED KOMODO Kippertie RF Support

komodo lens adapter support 03

The RF mount on the Komodo is a sprung mount system, and relies on small springs inside the mount to pull the adapter into the right place.

If the adapter support is installed incorrectly, it can result in the lens adapter being pushed or tilted in the wrong direction, which can result in focus and other optical issues.

B4002 1020 RED Komodo Kippertie Revolva Adapta RF PL Support 04 web
B4002.1020 RED KOMODO Kippertie Revolva & Adapta RF Support

The following installation sequence must be followed in order to ensure that the adapter is supported correctly on the camera body.

B4002 1020 RED Komodo Kippertie Revolva Adapta RF PL Support label
Mount & clamp screws for the Kippertie Revolva & Adapta support

Required Tools

You will need to use a 2.5mm Hex Key.

A – Mount Screw – M3x10mm – 2.5mm Hex
B – Captive Screw – M3 – 2.5mm Hex

Installation Steps

Step 1

Prepare the RED Komodo with the required plates. Ensure all the plates are secured and tight.

Step 2

Install the Kippertie adapter into the camera, allowing it to twist onto the camera body and click into place.

Step 3

Align the support to the Kippertie adapter, ensuring that the arm is on the left side. Using the 2.5mm hex key, connect the two M3 captive screws (B) into the mounting holes on the bottom of the adapter. Do not tighten fully at this point.

Step 4

Insert & secure the mounting screws (A) on the side & top plate in a criss-cross patern, while also tightening up the bottom captive screws (B).

Step 5

To remove the support. First, loosen the mounting screws (A) before loosening the two captive screws (B) on the bottom of the adapter.

Installation guide for RED KOMODO Vocas RF-PL Support

komodo lens adapter support

The RF mount on the Komodo is a sprung mount system and relies on small springs inside the mount to pull the adapter into the right place.

If the adapter support is installed incorrectly, it can result in the lens adapter being pushed or tilted in the wrong direction, which can result in focus and other optical issues.

B4002 1019 RED Komodo Vocas RF PL Support 03 web
B4002.1019 – RED KOMODO Vocas RF-PL Adapter Support

The following installation sequence must be followed in order to ensure that the adapter is supported correctly on the camera body.

B4002 1019 RED Komodo Vocas RF PL Support label
Vocas RF-PL Support

Required Tools

You will need to use a 2.5mm Hex Key.

A – Mount Screw – M3x10mm – 2.5mm Hex
B – Clamp Screw – M3x10mm – 2.5mm Hex

Installation Steps

Step 1

Prepare the RED Komodo with the required plates. Ensure all the plates are secured and tight.

Step 2

Using a 2.5mm Hex key, mount the support to the camera using the four screws (A) but do not tighten fully at this point.

Step 3

Install the lens adapter into the camera, allowing it to twist onto the camera body and click into place.

Step 4

Using the 2.5mm Hex key, gently tighten the clamping screw (B) on the support so that it starts to hold onto the adapter.

Step 5

Tighten up the mounting screws (A) on the side & top plate in a criss-cross pattern.

Step 6

Fully tighten the clamp screw (B) on the adapter support.

Step 7

To remove the support. First, loosen the clamp screw (B) before loosening the mounting screws (A) on the side & top plate.

Band Pro’s One World Open House

bandpro open house
Openhouse1
Band Pro’s tent exhibition space

After a two-year hiatus, Band Pro’s One World Open House is back by popular demand and will be held on Thursday 12/8/2022. Eat, drink and be merry with your friends at the perfect kick-off to the holiday season.

Band Pro’s Open House combines the best television and cinema technology, along with fine food & drink, and attendees comprising a who’s-who of the global cinematography community.

Band Pro’s Guest of Honor this year will be Emmy Award-winning cinematographer Checco Varese, ASC. Known for excellence in both film and television, Checco’s work includes Dopesick, It: Chapter 2, Daisy Jones & the Six, The Strain and much more.

We’ve got plenty of new releases for you to check out, like the Prodigy Air Deflector, Misfit Six & camera kits for the Sony VENICE 2, FX6, RED V-Raptor & more.

When is it?

Thursday, December 8th, 1:00 PM – 8:00 PM
3403 W Pacific Ave
Burbank, CA 91505

Hot Rod Cameras Customer Appreciation Shindig

hotrod shindig
image
Hot Rod Cameras 3rd Annual Customer Appreciation Shindig

Hot Rod Cameras is having its 3rd annual customer appreciation shindig this week.

Join us and the wider filmmaking community for a chill time, with hands-on gear demos, food trucks, craft beer and a raffle giveaway.

We’ve got plenty of new releases for you to check out, like the Prodigy Air Deflector, Misfit Six & camera kits for the Sony VENICE 2, FX6, RED V-Raptor & more.

When is it?

Tuesday, December 6, 3:00 PM – 7:00 PM PST

1% For The Planet

1ftp feature 1

This doesn’t just help your films.

Bright Tangerine is a proud member of 1% For The Planet. As a company, we believe in the power of business to be a force for good. We are committed to using our resources and platform to support causes that are working to create a healthier planet.

We have chosen to support environmental causes through our membership in 1% for the Planet, promising to give 1% of our annual profits to such organisations. We’ve gotten to know some amazing groups doing essential work in order to protect our environment.

We can be better

Recipients of Bright Tangerine’s contribution of 1% of its revenue:

Farnham Community Farm

farnham community farm

Farnham Community Farm is dedicated to sustainable and pesticide-free farming. They are a Community Supported Agriculture scheme and grow a weekly veg harvest share for members and also work closely with the local community welcoming volunteers and offering education.

Recyke-a-bike

recyke a bike


Recyke-a-bike
 is a wonderful organization that is making a difference for the environment. They are dedicated to recycling bicycles and parts, and they strive to keep bikes out of landfill.

The Redford Center

the redford center

The Redford Center promotes environmental education. They are dedicated to educating individuals about the importance of preserving our environment and support environmental education programs.

Sadhana Forest

sandhana forest

Sadhana Forest is an environmental organization that aims to restore the environment and create ecovillages. They are dedicated to growing trees and establishing long-lasting communities, and they strive to raise public awareness about the environment.

About 1% For The Planet

1% for the Planet is a global organization that connects dollars and doers to accelerate smart environmental giving. We recognize that the current level of environmental giving – only 3% of total philanthropy – is not enough to solve the most pressing issues facing our planet. Through our business and individual membership, 1% for the Planet inspires people to support environmental organizations through annual membership and everyday actions.

We advise on giving strategies, we certify donations, and we amplify the impact of the network. Started in 2002 by Yvon Chouinard, founder of Patagonia, and Craig Mathews, founder of Blue Ribbon Flies, our members have given more than $175 million to environmental nonprofits to date.

Today, 1% for the Planet is a network of more than 1,500 member businesses, a new and expanding core with hundreds of individual members, and thousands of nonprofit partners in more than 60 countries.

Learn more and join at onepercentfortheplanet.org.