LeftField 3 BMD Ursa Mini QR Baseplate

SKU: B4007.0111 In Stock


Set your Blackmagic Design URSA Mini at the correct height for 15mm LWS, speeding up transitions with the Open•UP quick-release that lets you lift off the camera from the dovetail. To support accessories, add a set of 15mm rods.

This Baseplate Kit comes with the LeftField 3 15mm LWS Baseplate Core, LeftField Dovetail Plate & URSA Mini riser.

  • Compatible with any LeftField 3 & ARRI standard dovetail
  • Snap on & snap off without needing to slide off dovetail
  • Designed for the Blackmagic Design URSA Mini
  • Adaptable to multiple camera systems with interchangeable risers
  • Compatible with LeftField 3 KASBAH Shoulder Support system


The LeftField 3 BMD URSA Mini QR Baseplate sets the camera to the correct height for 15mm LWS. It provides 15mm rod support for accessories and allows for faster transitions between setups using the patented Open•Up quick-release.

Snap On, Snap Off

The Open•Up quick-release features a three-stage design which lets you securely locks the baseplate in place, slide for balance & lift off vertically.

ARRI Dovetail Compatible

The baseplate automatically calibrates to any ARRI standard dovetail, even those that our out of tolerance and is also compatible with the LeftField Dovetail Plate for smaller setups.

What’s included:

It includes the LeftField 3 15mm LWS Baseplate Core; BMD Ursa Mini Riser & LeftField dovetail plate.

Interchangeable Risers

A wide range of risers are available to suit different cameras. If you own, rent or work with multiple cameras, simply swap the risers without buying a new baseplate each time.

LeftField 3 System

Customise your camera build with the extensive selection of accessories in the LeftField system. Letting you create the right setup for each and every task.

This kit has been updated to LeftField 3 and is not compatible with LeftField 2 accessories.

For a complete list of compatible accessories, visit www.brighttangerine.com/leftfield-compatibility

No Compromises

Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

Additional information

Weight .616 kg
Dimensions 12.4 × 10 × 4.5 cm
Camera Brand

Blackmagic Design

Camera Model

Rod Standard

You may also like…