Kit out the Canon C200 with a complete cage solution, adding strength and versatility to the camera setup while transferring any physical stress from the camera body to the cage.
The Canon C200 Left Field Cage is built around three main sections, the Universal 15mm LWS Baseplate, Sliding Top Plate & Side Plates which form the complete cage.
In addition to the three main sections, the kit also includes the carrying top handle and monitor bracket to reposition the Canon LA-V1 monitor bracket onto the handle or camera cage.
Designed to match the contours of the camera, all of the ports and buttons remain easily accessible. The camera can also slide in and out of the cage without having to disassemble the cage each time.
The Left Field Canon C200 cage shown clamped onto the Left Field ARRI Standard Dovetail with the Revolvr Atom follow focus & Misfit Atom matte box.
An ARRI dovetail standard clamp on the bottom of the baseplate provides a quick release for the camera to quickly transition between camera setups e.g. tripod to handheld with the Left Field ARRI Dovetail Plate or any standard ARRI dovetail. The camera can be easily positioned on the dovetail for optimal balance.
The baseplate has front and rear rod locks to support 15mm LWS industry standard rods. By having front and rear locks, two short sets of rods can be used to form a longer support, making it easier to transport and pack down. If a single set of rods are used, all four rod locks can be used for added rigidity.
The Sliding Top Plate also features an ARRI dovetail standard clamp that provides a quick release for the Left Field ARRI Dovetail Plate. The plate can be used to mount the top carrying handle or other accessories which can be quickly mounted to the top plate and adjusted for optimal balance.
A 15mm LWS rod bracket is also mounted to the top plate to for use with lens motors or other accessories like an EVF bracket. Particularly useful for drone and gimbal use.
The Left Field Canon C200 Cage being used by Cloakroom Media
Connecting the baseplate to the top plate are the left & right side plates which transfer any physical stress from the camera body to the cage and provide stability to the camera setup. The side plates feature multiple accessory points as well as an ARRI rosette for relocation of the handgrip.
The C200 Left Field Cage is contoured to the camera and features a low profile design while maintaining access to all of the camera ports and buttons.
Throughout the cage, 1/4″-20, 3/8″-16 & ARRI accessory mounts are provided for adding any additional accessories like the Titan Arm.