Products / Camera Accessories / RED DSMC2® Accessories / Left Field Top Plate for DSMC2

Left Field Top Plate for DSMC2

SKU: B4002.0003 IN STOCK

$347

Stay nimble with a low profile quick release top plate for all of your top-mounted accessories and trigger your camera from compatible devices on the go with a 3-pin Fischer RS port.

Compare
SKU: B4002.0003 Categories: , ,

Top Plate Core for DSMC2

A low profile top plate with 1/4"-20 & ARRI accessory mounts, quick release clamp & RS port.

In stock (can be backordered)

Dovetail Plate for DSMC2

The Dovetail Plate for DSMC2 is a quick release cheese plate that is compatible with the Top Plate Core for DSMC2.

In stock (can be backordered)

Description

The Left Field Top Plate Kit for DSMC2 mounts to the top of a DSMC2 camera and provides a quick release clamp for the Dovetail Plate for DSMC2 to use with a top handle or other accessories.

The top plate has an ARRI standard dovetail clamp which can also be used with the Left Field ARRI standard Dovetail (300mm) or any other third party ARRI standard dovetail to mount the camera to a jib or crane.

DSMC2 top kit

DSMC2 top kit

Both the Top Plate Core & Dovetail Plate for DSMC2 are designed to match the length of the DSMC2 camera body, providing enough space for the DSMC2 Monitor and to not obstruct any other module attached to the back of the camera body.

The 3-pin Fischer RS port can transmit a run/stop trigger signal to the camera when a compatible device and cable is connected.

The Dovetail Plate can slide back and forth for optimal balance when using it with the carrying top handle or any other mounted accessories. It can also be released quickly to pack the camera down for transport.

The dovetail plate features safety screws to prevent any accidental release. When the plate is required to stay fixed, the safety screws can be mounted on the right side of the plate to prevent the plate from being able to slide.

The top plate core features multiple 1/4″-20 and two ARRI accessory mounting points (3/8″-16).

Compatible with any DSMC2 camera, the Top Plate core mounts securely to the camera body using the four included screws using a 5/32″ Allen Key.

The Top Plate Core for DSMC2 has been tested by RED’s Engineering team to ensure compatibility with RED DSMC2 cameras.

*The 15mm LWS DSMC2 Baseplate & top plate is not compatible when the Teradek Sidekick Latitude is in use due to the protruding power-in powers.

* The DSMC2 Top Plate is not compatible with the RED Touch 4.7″ LCD monitor

RED and DSMC2 are trademarks™ or registered® trademarks of RED LLC. Bright Tangerine does not imply any affiliation with or endorsement by them.

Additional information

Weight .1 kg
Dimensions 8 × 13 × 1.5 cm
Camera Model

Top Plate Core for DSMC2

Dovetail Plate for DSMC2

Top Plate Core for DSMC2

A low profile top plate with 1/4"-20 & ARRI accessory mounts, quick release clamp & RS port.

In stock (can be backordered)

Dovetail Plate for DSMC2

The Dovetail Plate for DSMC2 is a quick release cheese plate that is compatible with the Top Plate Core for DSMC2.

In stock (can be backordered)

Reviews

There are no reviews yet.

Be the first to review “Left Field Top Plate for DSMC2”

Your email address will not be published. Required fields are marked *