LeftField 3 Sony FS5 QR Baseplate

SKU: B4004.0115

Available on back-order

$549

Set your Sony FS5 at the correct height for 15mm LWS, speeding up transitions with the Open•UP quick-release that lets you lift off the camera from the dovetail. To support accessories, add a set of 15mm rods.

This Baseplate Kit comes with the LeftField 3 15mm LWS Baseplate Core, LeftField Dovetail Plate & Sony FS5 riser.

  • Compatible with any LeftField 3 & ARRI standard dovetail
  • Sets camera to correct height and spacing for 15mm LWS accessories
  • Compatible with Sony FS5 I & II, Panasonic EVA-1, Varicam LT & Varicam 35
  • Adaptable to multiple camera systems with interchangeable risers
  • Compatible with LeftField 3 KASBAH Shoulder Support system

Available on back-order

Description

The LeftField 3 Sony FS5 QR Baseplate provides 15mm rod support for accessories with an ARRI dovetail standard quick release base.

Snap On, Snap Off

The Open•Up quick-release features a three-stage design which lets you securely locks the baseplate in place, slide for balance & lift off vertically.

ARRI Dovetail Compatible

The baseplate automatically calibrates to any ARRI standard dovetail, even those that our out of tolerance and is also compatible with the LeftField Dovetail Plate for smaller setups.

Compatible With:

This kit is compatible for the Sony FS5 I & FS5 II as well as the Panasonic EVA‐1 & Varicam 35 & Varicam LT cameras. If you own, rent or work with multiple cameras, you can use the baseplate with other camera systems by swapping out the riser block.

LeftField 3 System

Customise your camera build with the extensive selection of accessories in the LeftField system. Letting you create the right setup for each and every task.

This kit has been updated to LeftField 3 and is not compatible with LeftField 2 accessories.

For a complete list of compatible accessories, visit www.brighttangerine.com/leftfield-compatibility

No Compromises

Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.

Additional information

Weight 0.616 kg
Dimensions 12.4 × 10 × 4.5 cm
Camera Brand

Sony

Camera Model

Rod Standard