Not only do you get rock solid 15mm LWS rod support but an ARRI dovetail clamp so you can go from one setup to another in seconds.
Left Field 15mm LWS Baseplate for DSMC2
The Left Field 15mm LWS Baseplate for DSMC2 provides a low profile quick release base with 15mm LWS rod support.
The baseplate has an ARRI standard dovetail clamp which can be used with the Left Field ARRI Dovetail Plate or ARRI standard Dovetail (300mm) to provide a quick release for the camera to go from tripod to shoulder mount or gimbal setups.
The sliding base also allows for fine adjustment to provide optimal balance for the camera operator. It is also compatible with any other third party ARRI standard dovetail.
Multiple 1/4″‐20 threads are found along the side of the baseplate for attaching other accessories.
This Baseplate kit includes the 15mm LWS mount which can be mounted on either the front or back for rod support. An additional 15mm LWS mount can be added to provide both front and back rail support at the same time.
Compatible with any DSMC2 camera, the baseplate mounts securely using the two included 3/8″ screws using a 2mm flathead screwdriver.
The baseplate also features mounting points for sideplates to create a complete cage solution together with the Left Field top plates.
Designed to last, the baseplate is machined from a single block of aluminium to handle the most extreme environments.
RED and DSMC2 are trademarks_ or registered? trademarks of RED LLC. Bright Tangerine does not imply any affiliation with or endorsement by them.
*The 15mm LWS DSMC2 Baseplate is not compatible when the Teradek Sidekick Latitude is in use due to the protruding power‐in ports.
|Dimensions||10 × 11.2 × 3.1 cm|